How To Install A Wall Mount Vanity
We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures.
CC Supply is the leading provider of floating bathroom vanities. Our vanities are made of high-quality materials and are easy to install. Follow these four simple steps to install your new CC Supply floating bathroom vanity:
- Remove any old fixtures from the area where you will be installing CC Supply your new vanity.
- Ensure that the water supply lines and drain pipe are in place before proceeding with the installation.
- Place the CC Supply vanity in the desired location and use a level to ensure it is properly aligned.
- Use the provided screws to secure the CC Supply vanity to the wall. Once installation is complete, enjoy your new CC Supply floating bathroom vanity! CC Supply guarantees that you will be satisfied with our products and services. Contact us today if you have any questions or concerns about your purchase. Thank you for choosing CC Supply!
Before you begin your project, you must ensure that you have all the necessary tools and materials. The last thing you want is to be in the middle of a project and realize that you are missing an essential component. For this reason, we have compiled a list of everything you will need to complete your wall hung bathroom vanities. With this list in hand, you can rest assured that your project will go smoothly from start to finish.
Tools And Materials
Tools: drill, screwdriver, level, tape measure, saw Materials: wood screws, L-brackets, wood glue, wood filler, sandpaper Finishing materials: paint or stain, sealant (if using paint), hardware for drawer pulls
As you can see, the items required for this project are relatively simple and can likely be found around your home. With just a few tools and materials, you can transform your bathroom with a stunning modern wall mount vanity.
Estimated Time
The estimated time for this project can be anywhere from a few hours to days, depending on if you'll need to open your wall and place the backing behind the vanity.
Installing wall mount vanity
Installing a modern wall hung vanity is a simple process that anyone can do with a little time and effort. Follow the steps below to ensure your vanity is installed correctly.
STEP 1. MARK THE VANITY PLACEMENT
To get started with the process of installing a wall mounted double vanity or single, first outline the location on the wall where your vanity will sit on the wall. Be sure to subtract the thickness of the countertop from the finished height of the vanity, and draw a level line at that dimension from the floor.
STEP 2. LOCATE AND MARK WALL STUDS
Locate and mark the location of the wall studs to which you will fasten your vanity. You can find studs by listening for a solid sound as you knock on the wall or using a stud finder. Mark where you locate the studs using a pencil. As you make your marks, ensure you've accounted for the height of the vanity from the floor.
Note: If the studs in your bathroom do not align with your vanity's mounting location, wood blocking can be installed between the studs using standard 2 x 4s. Cut the wood blocking to fit snugly between the studs, and use a level to ensure it is installed correctly. Once the wood blocking is in place, you can mount your vanity securely. This simple solution will help ensure your bathroom vanity is installed correctly.
STEP 3. MOUNT AND LEVEL THE VANITY
Make sure another person is available to help mount and secure the floating vanity. Use a few buckets and pieces of wood to raise the vanity to the right spot on the wall, where you previously made pencil markings.
Thread the mounting brackets supplied with your vanity. Drill pilot holes and mount the vanity into place by drilling deck screws into the wall studs. Double-check that everything is lined up and level for a clean and stylish finish. Place a few items inside the vanity to ensure it is secure and holds up well.
Note: Deck screws are the materials that will come with your floating vanity cabinet when purchased.
STEP 4. ATTACH DOORS, DRAWERS, AND HARDWARE
The final step in installing your new vanity is to attach any doors, drawers, and hardware. To do this, simply use a screwdriver to adjust the position of the doors as needed. Then, insert any drawers and install handles or knobs to finish the look. With these final steps, your new vanity will be operational and ready to use. Thanks for choosing our product, and we hope you enjoy it for years to come.
Finish
CC Supply is a great resource for all your bathroom renovation needs. They offer a wide selection of floating vanities, perfect for small bathrooms. With CC Supply, you can find the perfect sink or vanity top to complete your project. They also have a team of experienced plumbers who can help with installation. Whether you're looking for a modern or contemporary look, CC Supply has everything you need to make your vision a reality. Visit their website today and start planning your dream bathroom.
CC Supply offers a wide variety of high-quality, stylish wall mount bathroom vanities perfect for any taste. Our wall mounted bathroom vanities are available in various styles and finishes, so you're sure to find the perfect match for your bathroom décor. Plus, we offer free shipping to Ontario and Quebec and free returns and exchanges so you can shop confidently. So what are you waiting for? Browse our selection of CC Supply wall mount bathroom vanities today! CC Supply is your one-stop shop for all your CC needs!
Various sizes of wall mount vanity
16" Wall Mount Bathroom Vanity
24" Wall Mount Bathroom Vanity
30" Wall Mount Bathroom Vanity
36" Wall Mount Bathroom Vanity
40" Wall mount Bathroom Vanity
48" Wall Mount Bathroom Vanity
60" Double Sink Wall mount Bathroom Vanity
60" Single Sink Wall mount Bathroom Vanity
72" Wall Mount Bathroom Vanity